Household Tea Packaging Machine/Manual Tea Bag Packing Machine 7-14G
Package Size: 40cm x 19cm x 10cm (15.75in x 7.48in x 3.94in)
Packaging machine can package 7-14 grams. Each bubble as needed (package), weight, density reference tea, using addition and subtraction on the feed plate gasket to adjust to the desired weight, not added to each well pads original weight about 7 grams, pad thickness 2MM gasket is about to increase 0.5 g, pad thickness shim about 4MM increased 1.0 g, pad shim thickness 8MM increased about 2.0 grams, and then screw the plate is fixed, while paying attention to the use of screws to adjust feeding plate balance.
Procedure
- Flip the middle shelf on the desktop
- The small bubble bag full, neatly set out spout
- Flip the base plate to the bottom of the tea bag
- the bottom and middle shelves put positive
- Put the upper feed plate, and fasten
- According to customer required per bulb (pack) weight, the reference density of tea, using subtraction adjustment shim plate board for feeding to the desired weight, not added to each well pads original weight about 7 grams, pad thickness 2MM gasket is about to increase 0.5 g, pad thickness shim about 4MM increased 1.0 g, 8MM spacer pad thickness increased about 2.0 grams, and then board the middle two screws fixing the plate, while paying attention to the use of screws adjusting the balance of the feed plate.
- Loading amount of tea down on the feed plate, so that each cell evenly into the tea leaves, tea excess sweep out from the side of the mouth, and then the upper plate out of the drawing board, tea vacuum bag to enter the following
EmoticonEmoticon